Sky Remote Control Codes

The following Sky Digital Remote Control codes are so you can get your Sky remote (rcu) to operate your TV: this is useful for changing the TV volume, turning the TV onto standby and basically saving you hunting around the normal television remote control. All of the codes listed below, and the sequence, will work with normal Sky, Sky+ (Sky Plus) and Sky HD (Sky High Definition) remote control units. Some more modern TVs, although there is a code listed, will not work with the Sky remote setup.

  • First find your TV’s brand from the list below.
  • Turn the TV and Digibox on and press TV on sky remote.
  • Press both the red and select button together (about 2 seconds) until the red light flashes twice on the remote.
  • Press the tv button again.
  • Type in your TV code. Red light on remote will flash twice.
  • Press the standby button on sky remote.
  • If TV turns off press select. The red light should flash twice.
  • If TV doesn’t turn off press tv, then standby - repeat until TV turns off, then press select button.
  • The codes listed will work about 85% of modern TV’s.
Aiwa 0406 Memorex 0037
Akai 0098 Metz 0491
Akura 0042 Mitsubishi 0150
Alba 0043 Nikkai 0528
Amstrad 0063 Nokia 0536
B&O 0118 Orion 0549
Beko 0125 Panasonic 0051
Beon 0899 Philips 0081
Brionvega 0147 Pioneer 0166
Bush 0157 Protech 0585
Crown 0225 Pye 0600
Daewoo 0092 Roadstar 0625
Decca 0244 Saisho 0649
Ferguson 0293 Samsung 0060
Fidelity 0294 Sanyo 0159
Finlandia 0296 Schneider 0665
Finlux 0297 Seleco 0672
Funai 0179 Sharp 0093
Genexxa 0330 Siemens 0680
Goldstar 0556 Sony 0000
Goodmans 0335 Tandy 0741
Granada 0340 Tatung 0049
Grundig 0345 Technics 0250
Harwood 0361 Thomson 0771
Hinari 0365 Thorn 0772
Hitachi 0145 Thorn-Ferg 0936
JVC 0053 Toshiba 0156
Loewe 0442 Telefunken 0757
Matsui 0477 Soundwave 0702

To buy replacement or extra Sky remotes go to the Sky Remotes and Accessories page.